2kv 5kv 8kv 15kv 25kv 35kv Type SHD-GC rubber mining cable with UL MSHA Certification
APPLICATION
For use with mobile, reeling, or stationary mining equipment, continuous mining machines, or longwall loading machines, blast hole drillers, and heavy-duty trailing cable where maximum protection is required.
Type SHD-GC is also an excellent choice for shovels, draglines, dredges, cranes and marine ships to shore power supply anytime extra durability is required.
CONSTUCTION
CONDUCTORS: Tin coated, soft drawn, annealed, flexible, rope-lay stranded copper per ASTM B-33/B-172.
SEPARATOR: A separator tape is applied between the conductor and insulation to facilitate stripping.
INSULATION: Black flame resistant, Ethylene Propylene Rubber (EPR), ozone, oil, water solvents, corrosive, and abrasion resistant per ICEA S-75-381/NEMA WC-58.
SHIELD SEPARATOR: An SBR tape is applied to each primary phase's insulation, 1/2 overlap with adhesive side up.CONDUCTOR SHIELD: Tin coated, soft drawn, annealed, copper braid shield (60% min. phase coverage), duplexes with nylon textile buffer colour code tracer (40% max. phase coverage).
COLOUR CODE: Red, Black, Blue
GROUND WIRES: Tin coated, uninsulated, soft drawn, annealed, rope bunched, flexible lay construction, per ASTM B-172 and B-33.
GROUND CHECK: Yellow, flame resistant, High Durometer Ethylene Propylene Rubber (HD EPR) insulation over tin coated, rope bunched, flexible lay copper.
CABLING: Three insulated shielded conductors are assembled in a helical configuration with two non-insulated ground wires and one yellow HD EPR insulated ground check. A woven nylon polyester binder is served over the entire cable assembly for added core stability
JacketEINFORCEMENT: A woven nylon polyester binder will be served between the inner andouter jacket layers for improved mechanical integrity.
JACKET: Mold cured, extra heavy-duty, pure integral fill, dual layer, flame resistant, thermosetting Chlorinated Polyethylene (CPE) jacket. Alternate jacket colours and reflective stripes available in High Tensile Rhino-X Jacket (consult with factory).
Standard freference
- Rhino™ Brand Mining Cable meets or exceeds applicable requirements of ICEA Standard S-75-381/NEMA WC-58, ASTM B-172 and B-33
- MSHA listed ; passes MSHA flame test
- CSA Listed File # LL65300 FT1, FT4, FT5 CSA C22.2, No. 96 Portable Power Cables
- CSA Standard M421 - Use of Electricity in Mines
Audited Supplier 
){kind=link}