| Customization: | Available |
|---|---|
| Certification: | ISO, CCC, CE, RoHS, VDE |
| Conductor Material: | Copper |
Industry-leading Audited Factory
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Application
For open and concealed wiring in dry locations only.For use in cable troughs and ventilated flexible cable ways in dry locations only. Minimum recommended installation temperature minus 40°C (with suitable handling procedures).Maximum conductor temperature 90°C. Approved for use with ceiling fixtures.
Standards
UL Standard C22.2 No. 131, No.38 and No.2256, RoHS Flame test.
UL FT4 Hazardous Location, SUN RES (outer jacket) SUN RES on inner jacket and insulated conductor available upon request, Direct Burial.
Technical Data
Temperature:-40°C to +90°C
Approvals:CSA Spec C22.2 No. 51.
Rated: 600 volts.
Features
ROHS approved, Low Voltage, Working Temperature 90ºC, Cold Resistant -40ºC, Flame Retardant
Structure
Solid Two, three or four copper conductors with low temperature XLPE insulation (RW90 XLPE) and bare copper bonding wire. Conductor assembly PP tape wrapped and covered with bare interlocked steel tape armor.
| Conductor | Ground Wire | Approx. Cable Dimension (mils) | Approx. Net Weight per 1000' (lbs) | Allowable Ampacity+ | ||||
| Size (AWG) | Number of Conductors | Number of Strands | Insulation Thickness (mils) | Size (AWG) | Number of Strands | |||
| TWO CONDUCTOR | ||||||||
| 14 | 2 | 1 | 19 | 14 | 1 | 360X162 | 57 | 15 |
| 12 | 2 | 1 | 19 | 12 | 1 | 410X179 | 82 | 20 |
| 10 | 2 | 1 | 24 | 10 | 1 | 494X210 | 124 | 30 |
| 8 | 2 | 7 | 35 | 10 | 1 | 612X269 | 186 | 40 |
| 6 | 2 | 7 | 35 | 10 | 1 | 683X304 | 225 | 55 |
| THREE CONDUCTOR | ||||||||
| 14 | 3 | 1 | 19 | 14 | 1 | 307 | 74 | 15 |
| 12 | 3 | 1 | 19 | 12 | 1 | 347 | 107 | 20 |
| 10 | 3 | 1 | 24 | 10 | 1 | 422 | 164 | 30 |
| 8 | 3 | 7 | 35 | 10 | 1 | 565 | 253 | 40 |
| 6 | 3 | 7 | 35 | 10 | 1 | 650 | 357 | 55 |
| 4 | 3 | 7 | 46 | 8 | 1 | 814 | 560 | 70 |
| 2 | 3 | 7 | 46 | 8 | 1 | 952 | 816 | 95 |
| FOUR CONDUCTOR | ||||||||
| 14 | 2/2 | 1* | 19 | 14 | 1 | 336 | 91 | 15 |
| 14 | 4 | 1** | 19 | 14 | 1 | 336 | 91 | 15 |
| 12 | 2/2 | 1* | 19 | 12 | 1 | 381 | 132 | 20 |
| 12 | 4 | 1** | 19 | 12 | 1 | 381 | 132 | 20 |
| 10 | 4 | 1 | 24 | 10 | 1 | 465 | 201 | 30 |
Hebei Huatong Wires and Cables Group Co., Ltd was established in 1993, cover 450, 000 square meters. With more than 450 sets of manufacturing equipment and 255 sets of testing equipment or apparatus. The annual production capacity is 1 billion Dollar, the amount of exports close to 70%.
Now there are over 2,000 employees in our company, among which 250 are technicians. Based on the scientific man- agement, Now we are comprehensive, large-scale enterprises in the wire and cable industry. We have more than 40 UL/CUL,CSA certification.
Our main products including Low voltage cable, Medium voltage cable, Solar cable, Control cable, Rubber cable, Mining cable, Winding cable,ESP cable, Shipboard cable, Aerial cables, Cables for locomotives, AAC, AAAC con- ductor, ACSR conductor, and many types of UL/CUL,CSA certificate cable, projects in more than 60 countries.
Packaging & Shipping
PACKING
Customized packing
We accept customized package, with your logo or brand printed on your label and box.
Export packing We use export carton/Steel Frame packing with shipping marks for the protection of the long way shipping.
SHIPPING
For large quantity orders
We cperat with some international shipping companies, so we can provide yo with the best transportation service.
For samples & small orders
We ship from international express companies such as TNT, FedEx, UPS and DHL etc.
Q:What are intrinsically safe cables?
A:Intrinsic safety is a protection technique for the safe operation of electrical and electronic equipment in hazardous areas where any ignition source needs to be eliminated.
Electrical cables are essentially sealed and so may be regarded as intrinsically safe in certain applications if protected from damage, external electrical or magnetic fields (EMI), and isolated from non-intrinsically safe circuits. The junctions and switches pose a potential hazardous ignition point in these environments and circuits. Intrinsically safe cables are usually coloured blue so as to identify the potential risk of the electric circuit and the need for special consideration. The cables are often protected by tough sheathing materials such as polyurethane to prevent any mechanical damage which could compromise electrical safety. Examples of intrinsically safe cables include the French Standard NF M87-202 instrumentation cables.
6.What are cable ratings?
Cable ratings determine the parameters within which a cable can be safely used. The most typical cable ratings are temperature, voltage and current.
Temperature rating is usually defined as one of the following:
- Max conductor temperature rating
- Minimum installation temperature rating
- Minimum flexible temperature rating.
Voltage is usually defined in terms of the following:
Uo = The R.M.S value between any insulated conductor and the earth or metal covering.
U = The R.M.S value between any phase conductor and another phase conductor or system of single insulated conductors.
(Um) = Maximum system voltage
The current rating is usually defined in terms of:
- Normal maximum continuous current rating
- Short circuit current rating
Cables may also be de-rated depending on the method of installation, for example, a cable installed in a thermally insulated wall will have a lower current rating than a cable of the same size and type which is installed in free air or in an open cable tray.
Cables installed in the ground at a higher than normal ambient temperature will have a lower current rating.
Q:When can I get the price?
A:We usually quote within 6 hours after we get your inquiry. If you are very urgent to get the price,please call us or tell us in your e-mail so that we will regard your inquiry priority.
Q:Are you a manufacturer or trading company?
A:We are a professional manufacturer with more than 28 years experience. We can control your order from the first beginning to the last.
Welcome to visit us. We'll pick you up in Beijing or Tianjin.
Q:How does your company do regarding Quality Control ?
A: 1) All raw material we selected the high quality one.
2) Professional & Skilful workers care every details in handling the producing.
3) Quality Control Department specially responsible for quality checking in each process.
Q:How can I get a sample to test your quality?
A:The samples are free for you. New clients are expected to pay for the courier cost.
Q:What is your MOQ?
A:The MOQ is different, as the different cable type.
Q:Does your company accept OEM production?
A:Yes, OEM/ODM is available.
){kind=link}